Dell · laptop motherboard

Dell Latitude E6430 LA-8831P

SchematicBoardviewBIOS
Board code
LA-8831P
Platform
QCZ00
Made by
Compal
Revisions
Rev 1.0
Files
5
Updated

Dell Latitude E6430 LA-8831P is a laptop motherboard designed by Compal and used in the Dell Latitude E6430, Dell E6430U-LA-8831P and Dell Latitude 6430U.

The catalog has 1 schematic, 2 boardview files and 2 BIOS files for it, posted between 2021 and 2023 across 3 Telegram channels. Each download button opens the original Telegram post.

The files are marked Rev 1.0; other revisions of the same board can differ in parts and layout.

The boardview comes in .BDV, .BRD and .CAD format. .CAD files usually need FlexBV or the viewer they were exported for; OpenBoardView handles .BRD, .BDV and .FZ. See OpenBoardView: Installation and First Steps.

With both a schematic and a boardview you can find a net on the diagram and then locate the same part on the board by its reference designator. No Boardview for Your Board? How to Work Without One shows the workflow.

Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Also listed under platform QCZ00.

Compatible models

Files for Dell Latitude E6430 LA-8831P

Schematics 1 All schematics →

Boardview files 2 All boardview files →

BIOS and firmware 2 All bios and firmware →

Frequently asked questions

Which laptops use the LA-8831P motherboard?
File names in the catalog tie LA-8831P to the Dell Latitude E6430, Dell E6430U-LA-8831P and Dell Latitude 6430U. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of LA-8831P do I have?
Files for this board mention Rev 1.0. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
How do I open the LA-8831P boardview file?
The boardview for LA-8831P is available as .BDV, .BRD and .CAD. .BDV and .BRD usually opens in OpenBoardView (free) or FlexBV. .CAD usually needs FlexBV or the matching viewer. See What Is a Boardview File and Why You Need One.
What should I check before flashing the LA-8831P BIOS?
Read the original chip with a programmer and save two copies before writing anything. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file