MSI · laptop motherboard

MSI PE62 MS-16JF

SchematicBoardviewBIOS
Board code
MS-16JF
Revisions
Rev 0A
Files
3
Updated

MSI PE62 MS-16JF is a laptop motherboard used in the MSI PE62.

The catalog has 1 schematic, 1 boardview file and 1 BIOS file for it, posted between 2021 and 2024 across 3 Telegram channels. Each download button opens the original Telegram post.

The files are marked Rev 0A; other revisions of the same board can differ in parts and layout.

The boardview comes in .BDV and .CAD format. .CAD files usually need FlexBV or the viewer they were exported for; OpenBoardView handles .BRD, .BDV and .FZ. See OpenBoardView: Installation and First Steps.

With both a schematic and a boardview you can find a net on the diagram and then locate the same part on the board by its reference designator. No Boardview for Your Board? How to Work Without One shows the workflow.

Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Also listed under codes MS-16JF1, MS-179F.

Compatible models

  • MSI PE62

Files for MSI PE62 MS-16JF

Schematics 1 All schematics →

Boardview files 1 All boardview files →

BIOS and firmware 1 All bios and firmware →

Notes from the source posts

  • MSI GV72 GF72 8RD MS-16JF MS-16JF1 MS-179F Rev 0A(1.0)

Frequently asked questions

Which laptops use the MS-16JF motherboard?
File names in the catalog tie MS-16JF to the MSI PE62. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of MS-16JF do I have?
Files for this board mention Rev 0A. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
How do I open the MS-16JF boardview file?
The boardview for MS-16JF is available as .BDV and .CAD. .BDV usually opens in OpenBoardView (free) or FlexBV. .CAD usually needs FlexBV or the matching viewer. See What Is a Boardview File and Why You Need One.
What should I check before flashing the MS-16JF BIOS?
Read the original chip with a programmer and save two copies before writing anything. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file