MSI · desktop motherboard

MSI B350 Tomahawk MS-7A34

SchematicBoardviewBIOS
Board code
MS-7A34
Revisions
Rev 1.0, Rev 2.0, Rev 3.0, Rev 4.0
Files
9
Updated

MSI B350 Tomahawk MS-7A34 is a desktop motherboard.

The catalog has 2 schematics, 6 boardview files and 1 BIOS file for it, posted between 2022 and 2024 across 3 Telegram channels. Each download button opens the original Telegram post.

File names mention 4 board revisions (Rev 1.0, Rev 2.0, Rev 3.0 and Rev 4.0). Check the revision printed on your PCB before relying on a boardview or flashing a BIOS dump — How to Open .FZ Boardview Files explains why it matters.

The boardview comes in .CAD and .BDV format. .CAD files usually need FlexBV or the viewer they were exported for; OpenBoardView handles .BRD, .BDV and .FZ. See How to Open .PCB and .CAD Boardview Files.

With both a schematic and a boardview you can find a net on the diagram and then locate the same part on the board by its reference designator. No Boardview for Your Board? How to Work Without One shows the workflow.

BIOS notes: file names mention 16 MB chip sizes. Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Compatible models

  • MSI B350 Tomahawk

Files for MSI B350 Tomahawk MS-7A34

Schematics 2 All schematics →

Boardview files 6 All boardview files →

BIOS and firmware 1 All bios and firmware →

Frequently asked questions

Which laptops use the MS-7A34 motherboard?
File names in the catalog tie MS-7A34 to the MSI B350 Tomahawk. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of MS-7A34 do I have?
Files for this board mention Rev 1.0, Rev 2.0, Rev 3.0 and Rev 4.0. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
How do I open the MS-7A34 boardview file?
The boardview for MS-7A34 is available as .CAD and .BDV. .BDV usually opens in OpenBoardView (free) or FlexBV. .CAD usually needs FlexBV or the matching viewer. See What Is a Boardview File and Why You Need One.
What should I check before flashing the MS-7A34 BIOS?
Read the original chip with a programmer and save two copies before writing anything. File names for this board mention 16 MB images; the dump size must match your chip. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file