Lenovo · laptop motherboard

Lenovo ThinkPad E14 NM-E211

SchematicBoardviewBIOS
Board code
NM-E211
Platform
JE542
Made by
LCFC
Revisions
Rev 0.0, Rev 1.0
Files
5
Updated

Lenovo ThinkPad E14 NM-E211 is a laptop motherboard designed by LCFC and used in the Lenovo ThinkPad E14 and Lenovo ThinkPad E15.

The catalog has 1 schematic, 1 boardview file and 3 BIOS files for it, posted between 2023 and 2025 across 3 Telegram channels. Each download button opens the original Telegram post.

File names mention 2 board revisions (Rev 0.0 and Rev 1.0). Check the revision printed on your PCB before relying on a boardview or flashing a BIOS dump — How to Open .FZ Boardview Files explains why it matters.

The boardview comes in .TVW format. .TVW files usually need FlexBV or the viewer they were exported for; OpenBoardView handles .BRD, .BDV and .FZ. See How to Open .TVW Boardview Files.

With both a schematic and a boardview you can find a net on the diagram and then locate the same part on the board by its reference designator. No Boardview for Your Board? How to Work Without One shows the workflow.

BIOS notes: file names mention 1 MB and 64 MB chip sizes. Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Also listed under platform JE542.

Compatible models

Files for Lenovo ThinkPad E14 NM-E211

Schematics 1 All schematics →

Boardview files 1 All boardview files →

BIOS and firmware 3 All bios and firmware →

Notes from the source posts

  • You can give us as a gift.

Frequently asked questions

Which laptops use the NM-E211 motherboard?
File names in the catalog tie NM-E211 to the Lenovo ThinkPad E14 and Lenovo ThinkPad E15. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of NM-E211 do I have?
Files for this board mention Rev 0.0 and Rev 1.0. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
How do I open the NM-E211 boardview file?
The boardview for NM-E211 is available as .TVW. .TVW usually needs FlexBV or the matching viewer. See What Is a Boardview File and Why You Need One.
What should I check before flashing the NM-E211 BIOS?
Read the original chip with a programmer and save two copies before writing anything. File names for this board mention 1 MB and 64 MB images; the dump size must match your chip. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file