Lenovo · laptop motherboard

Lenovo IdeaPad 3 17ADA05 NM-D151

SchematicBoardviewBIOS
Board code
NM-D151
Platform
GV551
Made by
LCFC
Revisions
Rev 1.0
Files
9
Updated

Lenovo IdeaPad 3 17ADA05 NM-D151 is a laptop motherboard designed by LCFC and used in the Lenovo IdeaPad 3 17ADA05.

The catalog has 1 schematic, 3 boardview files and 5 BIOS files for it, posted between 2021 and 2026 across 4 Telegram channels. Each download button opens the original Telegram post.

The files are marked Rev 1.0; other revisions of the same board can differ in parts and layout.

The boardview comes in .BDV and .TVW format. .TVW files usually need FlexBV or the viewer they were exported for; OpenBoardView handles .BRD, .BDV and .FZ. See OpenBoardView: Installation and First Steps.

With both a schematic and a boardview you can find a net on the diagram and then locate the same part on the board by its reference designator. No Boardview for Your Board? How to Work Without One shows the workflow.

BIOS notes: some archives also hold EC/KBC firmware. Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Also listed under platform GV551.

Compatible models

  • Lenovo IdeaPad 3 17ADA05

Files for Lenovo IdeaPad 3 17ADA05 NM-D151

Schematics 1 All schematics →

Boardview files 3 All boardview files →

BIOS and firmware 5 All bios and firmware →

Frequently asked questions

Which laptops use the NM-D151 motherboard?
File names in the catalog tie NM-D151 to the Lenovo IdeaPad 3 17ADA05. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of NM-D151 do I have?
Files for this board mention Rev 1.0. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
How do I open the NM-D151 boardview file?
The boardview for NM-D151 is available as .BDV and .TVW. .BDV usually opens in OpenBoardView (free) or FlexBV. .TVW usually needs FlexBV or the matching viewer. See What Is a Boardview File and Why You Need One.
What should I check before flashing the NM-D151 BIOS?
Read the original chip with a programmer and save two copies before writing anything. Some archives include EC/KBC firmware, which may need to be written to a separate chip. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file