HP · laptop motherboard

HP TPN-Q194 DAG3AAMBAG0

SchematicBIOS
Board code
DAG3AAMBAG0
Platform
Quanta G3AA
Made by
Quanta
Revisions
Rev E, Rev F, Rev G
Files
12
Updated

HP TPN-Q194 DAG3AAMBAG0 is a laptop motherboard designed by Quanta and used in the HP TPN-Q194 and HP Omen 15-CE.

The catalog has 2 schematics and 10 BIOS files for it, posted between 2019 and 2025 across 4 Telegram channels. Each download button opens the original Telegram post.

File names mention 3 board revisions (Rev E, Rev F and Rev G). Check the revision printed on your PCB before relying on a boardview or flashing a BIOS dump — How to Open .FZ Boardview Files explains why it matters.

The schematic files are PDFs; the first pages usually hold the block diagram and the power sequence. New to schematics? Start with How to Use a Schematic and a Boardview Together.

BIOS notes: some archives also hold EC/KBC firmware; versions with a cleaned ME region are included. Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Also listed under platform Quanta G3AA; codes DAG3AAMBAF0, DAG3AAMBAE0, DAG3AAMBG0, DAG3AAMBAFO.

Compatible models

  • HP TPN-Q194
  • HP Omen 15-CE

Files for HP TPN-Q194 DAG3AAMBAG0

Schematics 2 All schematics →

BIOS and firmware 10 All bios and firmware →

Notes from the source posts

  • HP OMEN 15-ce008nt DAG3AAMBAG0 REV:G
  • BIOS Version - F.19
  • ME Version : 11.8.65.3590
  • Windows Key : NWW2P-V32GK-CJP3P-V6X9H-XXXXX
  • Motherboard - 838F
  • EC Version - 402800
  • You can give us as a gift.
  • DAG3AAMBAF0 REV. F

Frequently asked questions

Which laptops use the DAG3AAMBAG0 motherboard?
File names in the catalog tie DAG3AAMBAG0 to the HP TPN-Q194 and HP Omen 15-CE. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of DAG3AAMBAG0 do I have?
Files for this board mention Rev E, Rev F and Rev G. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
What should I check before flashing the DAG3AAMBAG0 BIOS?
Read the original chip with a programmer and save two copies before writing anything. Some archives include EC/KBC firmware, which may need to be written to a separate chip. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file