HP · laptop motherboard

HP EliteBook X360 G8 LA-J443P

BoardviewBIOS
Board code
LA-J443P
Platform
GPM30
Made by
Compal
Revisions
Rev 0.2, Rev 1.0
Files
8
Updated

HP EliteBook X360 G8 LA-J443P is a laptop motherboard designed by Compal and used in the HP EliteBook X360 G8 and HP EliteBook X360.

The catalog has 1 boardview file and 7 BIOS files for it, posted between 2023 and 2026 across 4 Telegram channels. Each download button opens the original Telegram post.

File names mention 2 board revisions (Rev 0.2 and Rev 1.0). Check the revision printed on your PCB before relying on a boardview or flashing a BIOS dump — How to Open .FZ Boardview Files explains why it matters.

The boardview comes in .BDV and .CAD format. .CAD files usually need FlexBV or the viewer they were exported for; OpenBoardView handles .BRD, .BDV and .FZ. See OpenBoardView: Installation and First Steps.

BIOS notes: file names mention 32 MB chip sizes. Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Also listed under platform GPM30.

Compatible models

  • HP EliteBook X360 G8
  • HP EliteBook X360

Files for HP EliteBook X360 G8 LA-J443P

Boardview files 1 All boardview files →

BIOS and firmware 7 All bios and firmware →

Frequently asked questions

Which laptops use the LA-J443P motherboard?
File names in the catalog tie LA-J443P to the HP EliteBook X360 G8 and HP EliteBook X360. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of LA-J443P do I have?
Files for this board mention Rev 0.2 and Rev 1.0. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
How do I open the LA-J443P boardview file?
The boardview for LA-J443P is available as .BDV and .CAD. .BDV usually opens in OpenBoardView (free) or FlexBV. .CAD usually needs FlexBV or the matching viewer. See What Is a Boardview File and Why You Need One.
What should I check before flashing the LA-J443P BIOS?
Read the original chip with a programmer and save two copies before writing anything. File names for this board mention 32 MB images; the dump size must match your chip. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file