HP · laptop motherboard

HP 14S DA0PAKMB6F0

SchematicBoardviewBIOS
Board code
DA0PAKMB6F0
Platform
Quanta PAK
Made by
Quanta
Revisions
Rev F
Files
4
Updated

HP 14S DA0PAKMB6F0 is a laptop motherboard designed by Quanta and used in the HP 14S.

The catalog has 1 schematic, 1 boardview file and 2 BIOS files for it, posted between 2023 and 2026 across 3 Telegram channels. Each download button opens the original Telegram post.

The files are marked Rev F; other revisions of the same board can differ in parts and layout.

The boardview comes in .BDV and .CAD format. .CAD files usually need FlexBV or the viewer they were exported for; OpenBoardView handles .BRD, .BDV and .FZ. See OpenBoardView: Installation and First Steps.

With both a schematic and a boardview you can find a net on the diagram and then locate the same part on the board by its reference designator. No Boardview for Your Board? How to Work Without One shows the workflow.

Read and save the original chip contents before you write anything to it — Keeping the Windows Product Key (MSDM) When Reflashing a BIOS.

Also listed under platform Quanta PAK; codes DA0PAKMB6F1.

Compatible models

Files for HP 14S DA0PAKMB6F0

Schematics 1 All schematics →

Boardview files 1 All boardview files →

BIOS and firmware 2 All bios and firmware →

Notes from the source posts

  • ┄┅┅••⋆°𓄼 𓄹°⋆••┅┅┄
  • You can give us as a gift.

Frequently asked questions

Which laptops use the DA0PAKMB6F0 motherboard?
File names in the catalog tie DA0PAKMB6F0 to the HP 14S. Laptops sold under one model name can use different boards, so confirm by the code printed on the motherboard.
Which revision of DA0PAKMB6F0 do I have?
Files for this board mention Rev F. The revision is printed on the PCB silkscreen, usually next to the board code. Pick files with the same revision when you can; if yours is not listed, the closest revision is usually fine for the schematic but check part positions in the boardview carefully.
How do I open the DA0PAKMB6F0 boardview file?
The boardview for DA0PAKMB6F0 is available as .BDV and .CAD. .BDV usually opens in OpenBoardView (free) or FlexBV. .CAD usually needs FlexBV or the matching viewer. See What Is a Boardview File and Why You Need One.
What should I check before flashing the DA0PAKMB6F0 BIOS?
Read the original chip with a programmer and save two copies before writing anything. A dump from another board carries that board's serial number and MAC address, so restore yours from the backup.

Guides for this board

Similar boards

Browse more

Files are hosted on Telegram by third parties; ExcitingSpas.com only links to public posts. Check that a file matches your board before using it. Disclaimer · Report a file